About Advanced Features & Operation
31
DUCT SENSOR (P/N G100-71308305) - The
thermostat is programmed from the factory to
automatically recognize when a Duct Sensor is
connected (step #12, page 21).
The Duct Sensor measures indoor air temperature
and sends this information to the thermostat; it
measures temperature with a range of 32˚to 99˚F.
IMPORTANT: Do not use shielded wire. Do not
run sensor wiring in the same conduit as the
24VAC thermostat wiring. Electrical interference
may cause the sensor to give incorrect temperature readings.
See the Duct Sensor instructions for further details.
Digital Sensor
High Temp. Heat
Shrink Tubing
Plenum Rated
Cable
White
Black
Digital Sensor
Plenum Rated
Cable
White
Black
OUTSIDE SENSOR - To view an Outside Sensor (step #12, page 21), enter
the Advanced Setup by pressing and holding the MODE button. While
holding MODE, press the FAN button for 5 seconds to enter Setup screens.
Advance to setup step #12 by repeatedly pressing the MODE button. If an
optional outside sensor is connected, the outside temperature will appear
in the clock display.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
