Carrier 38MAQB09-1 - Fan Assembly

53
DISASSEMBLY INSTRUCTIONS SIZES 09−12 (CONT)
4) Remove the front
panel screws,
including the motor
holder screws and
then remove the
front panel.
5) Remove the right
side plate screws
and remove the
right side plate.
2 Fan assembly How to remove the fan
assembly.
1) Remove the panel
plate as stated in
section 1 then
remove the hex
nut securing the
fan and then
remove the fan.
Top panel
screw
Motor holder screws
Reactor
Compressor and
liquid-gas separator
Nut securing the fan
Left plate screws
Front panel screws
Electronic control box
Fan