Carrier 38MAQB09-1 - Four-Way Valve

56
DISASSEMBLY INSTRUCTIONS SIZES 09−12 (CONT)
5) Remove the
ground wires.
6) Remove the power
supply wires (L1,
L2, S).
7) Remove the
electronic control
box.
4 Four-way
valve
How to remove the
four-way valve.
1) Complete the
steps in sections
1,2,3.
2) Recover the
refrigerant from
the refrigerant
circuit.
3) Remove the coil
screw and then
remove the coil.
4) Detach the
welded parts of
four-way valve
and pipe.
5) Remove the
four-way valve
ass’y.
The picture of four-way valve may be different from
the one on your side.
Four-way
valve
Four-way valve coil, secured by one screw.
Welded parts