Carrier 38MAQB09-1 - Electrical Parts

55
DISASSEMBLY INSTRUCTIONS SIZES 09−12 (CONT)
3 Electrical
parts
How to remove the
electrical parts.
1) Complete the
steps in sections 1
and 2 then remove
the 3 connectors
for the compressor
and the electrical
heaters.
2) Release the
reactor connector.
3) Pull out the two
blue wires
connected to the
four way valve.
4) Remove the
compressor top
temp. sensor
connectors,
condenser coil
temp. sensor (T3),
outdoor ambient
temp. sensor (T4)
and the discharge
temp. sensor (T5).
Reactor connector
Four temp. sensor connectors.
Compressor connector
Two blue wires of four way valve