Carrier 38MAQB09-1 - Page 60

60
DISASSEMBLY INSTRUCTIONS SIZE 18K (CONT)
2 Fan ass’y How to remove the fan
ass’y.
1) After you remove
the panel plate
(see section 1),
remove the hex
nut securing the
fan and then
remove the fan.
2) Remove the one
screw. Loosen the
hooks and open
the electronic
control box cover.
3) Release the fan
motor connector
and the four way
valve connector.
Compressor and
liquid-gas separator
Electronic control box
Nut securing the fan
Two reactors
Fan
Fan motor connector
Four way valve connector