Carrier 40QSM009DS - Page 67

64
Locate the hanging arm on the hanging screw
bolt. Prepare the mounting bolts on the unit.
Put the side panels and grilles back.
② Wall-mounted installation
Hang the indoor unit by insert the tapping
screws into the hanging arms on the main unit.
(The bottom of body can touch with floor or
suspended, but the body must install vertically.)
13.2.4 Slim cassette indoor unit
installation
13.2.4.1 Service space for indoor unit
Capacity (Btu/h)
A
H
24K
mm
205
>235
inch
8.07
>9.25
36K
mm
245
>275
inch
9.65
>10.83
48K
mm
287
>317
inch
11.30
>12.48
13.2.4.2 Bolt pitch
13.2.4.3 Install the pendant bolt