8
Collegamenti elettrici
Il kit è applicabile alle versioni Satellite
40SMC-40JX-40JS,quindi dotato di tre
diversi schemi elettrici e cavi
connessione termostato.
Collegamenti elettrici per 40SMC.
-Rimuovere il cavo blu (neutro) collegato
alla connessione J3 della scheda e
collegare il cavo termostato (rif
)
secondo schema (fig. 16).
Collegamenti elettrici per 40JX.
-Rimuovere il cavo blu (neutro) collegato
alla connessione P3 della scheda e
collegare il cavo termostato (rif
)
secondo schema (fig. 17).
Collegamenti elettrici per 40JS.
-Collegare un cavo blu (neutro) (rif
)
del termostato al neutro N della
morsettiera, collegare l’altro cavo blu
dotato di morsetto a vite alla morsettiera
del comando secondo schema (fig. 18).
• Rimontare la bacinella e i pannelli
precedentemente tolti e ridare
tensione all’unità.
Fig. 18 -
Abb. 18
Electrical connections
This kit can be installed on all Satellite
versions 40SMC-40JX-40JS as it is fitted
with three different wiring diagrams and
thermostat connecting cables.
Electrical connections for 40SMC.
-Remove the blue (neutral) cable, which
is connected to the J3 connection of the
card and connect the thermostat cable
(rif ) following the wiring diagram
(fig. 16).
Electrical connections for 40JX.
-Remove the blue (neutral) cable, which
is connected to the P3 connection of the
card and connect the thermostat cable
(rif ) following the wiring diagram
(fig. 17).
Electrical connections for 40JS.
-Connect a blue (neutral) cable (rif ) of
the thermostat to the neutral N in the
terminal block, and then connect the
other blue cable provided with a screw
terminal to the control terminal block
(fig. 18).
• Replace the drain pan and panels
previously removed and reconnect the
unit power supply.
Wiring diagram /
Schema elettrico
/ Schéma de câblage /
Schalplan
/ Diagrama del cableado
40JS
40JS
B
B
FTP
HEV
TAE10
TAE18
40JS
B
B
FTP
HEV
TAE12
B
B
XR83
FTP
HEV
40JS
B
B
FTP
HEV
XR82
40JS
B
B
FTP
HEV
TAE007
40JS