No. Part name Procedure Remarks
7
Fan motor
(Continued)
2. Attachment
2) Fix the fan motor lead, TC sensor and
TCJ sensor with the clamp of the bell
mouth.
3) Mount the electric parts box with the
fixing screws A and B
(
∅
4 × 10, 3 pcs.
∅
4 × 8, 1 pc.)
4) Connect the connector removed in item
1 as before and then fix wiring with th
clamp.
5) Following to work of item 2 of 2, mount
the electric parts box cover and the
suction grille as before.
Clamp
Fan motor lead
M6 nut
FFan motoran motor
Motor lead Motor lead
holding brholding bracketet
Fan motor
Motor lead
holding bracket
Fixing screws (Ø4 × 8)
To Next Page
Loading...
