To Next PageTo Next Page
Need help?Do you have a question about the Carrier 40TSV0131UP and is the answer not in the manual?
General| Refrigerant | R-410A |
|---|---|
| Cooling Capacity | 13000 BTU |
| Voltage | 208/230V |
| Power Supply | 1 Phase, 60Hz |
| Operating Temperature Range (Cooling) | 64°F |
Important safety considerations for daily operation and general use.
Guidelines for safe handling and storage of the air conditioner during transport.
Safety instructions for the installation process, including electrical work.
Identifies the components of the indoor air conditioning unit.
Identifies the components of the outdoor air conditioning unit.
Details the names and functions of buttons on the wireless remote controller.
Instructions on how to set the clock on the remote controller.
Precautions and guidelines for using and handling the remote controller.
Step-by-step guide on operating the air conditioner using the wireless remote.
Describes the various icons and indicators on the wired remote controller display.
Explains how to use the buttons on the wired remote controller for operation.
Provides guidance on the proper usage of the wired remote controller.
Instructions for setting timer operations using the wired remote controller.
How to activate and configure the power saving mode via the wired remote.
How to enable automatic swinging of the airflow louvers.
How to use the FIX button to set a specific louver direction.
How to use the SWING button to activate or stop louver swinging.
Detailed steps for setting louver direction with the wired remote.
Explanation of the self-clean function and its timing.
How to start temporary operation using the unit's button.
How to stop temporary operation.
Steps to set up a second remote controller for multi-unit systems.
Guide on configuring different louver swing types.
Description of the standard louver swinging pattern.
Description of the dual louver swinging pattern.
Description of the cyclic louver swinging pattern.
Instructions for cleaning the air filters to maintain performance.
Procedures for preparing the unit for long-term storage.
Maintenance task before the cooling season begins.
Recommended periodic checks and maintenance by a dealer.
Troubleshooting common issues with wireless remote operation.
Troubleshooting common issues with wired remote operation.
Pre-operation checks for proper functioning.
Explanation of the 3-minute delay for compressor protection.
How the auto-restart function works after power interruption.
Recommended temperature and humidity ranges for operation.
How the protective device operates and what to do if activated.
Specific conditions to check during cooling operation.
List of unsuitable locations for air conditioner installation.
Precautions regarding noise and vibration during installation.
