11
By clicking on the blue number, you can select the indoor units that need to be controlled
from the number of indoor units currently controlled.
Increase the setting temperature
ON/OFF the unit/units
Return to the upper layer
Return to the Home
Reduce the setting temperature
In the upper interface, you can control the On/O, mode, temperature setting, wind speed, control
mode, control interface as shown above.
Note: Mode, wind speed, temperature setting and control mode are not allowed to change under
shutdown mode.
In the pull-up list, if you choose “Control Selected Unit”, the display interface is as follows.
Picture 8
Function operation
English
To Next Page
Loading...
