4
Table 2 — Components Shipped With Unit
NAME SHAPE QUANTITY FUNCTION
Nut 8 To connect the construction cover board to the fan motor
Washer 8 To connect the construction cover board to the fan motor
Construction cover board 1 Used to cover the fan motor
Bolt 4 To connect the construction cover board to the fan motor
Insulation 2 For covering the coil stub outs
Insulation 1 For covering the condensate drain
Clamp 1 For connecting the drain
Tie rope 5 For insulation
Condensate connection 1 For connecting drain
PQE connection wire 2 To connect outdoor unit, indoor unit, and sub MDC
Copper nut 1 Connect piping
Flexible conduit and connectors 1 Routing power lines
Connecting wire 1 For connecting occupancy sensor
Copper pipe for gas side 1 For connecting the refrigerant pipe
Copper pipe for liquid side 1 For connecting the refrigerant pipe
No Beep Harness 1 Prevent beeping noise
LEGEND
MDC — Multiport Distribution Controller
To Next Page
Loading...
