25
Fig. 42 —Fan Disassembly (048-054)
1. Remove all 12 screws from the Safety Drain Tray, and remove the safety drain tray. See Fig. 41.
2. Remove all 4 bolts from the fan assembly. See Fig. 42.
3. Horizontally push the fan assembly until it cannot not move any further, and lift up slightly, and take down to remove. See Fig. 42.
4. After the motor maintenance is complete, reinstall the fan assemblies, and connect the motor with electric control box.
Side view of fan assembly
installation state
Front view of fan assembly installation
Push fan assembly
horizontally to the end
(about 71in), and
then take off it.
Fan assembly is taken off
Move 18mm
Move
Scroll
Pothook
To Next Page
Loading...
