13
11. INSTALLATION ACCESSORIES
11.1 STANDARD INSTALLATION ACCESSORIES SUPPLIED FROM THE FACTORY
DESCREPTION SHAPE QTY USE
Battery 1.5 volt size AAA
alkaline type
2 To operate the wireless remote control
Wireless remote control
1 To operate the air conditioner
Plastic holder for remote
1 To mount remote control on the wall
Owner manual
1 To illustrate control functions of operation
Installation Manual 1 To illustrate installation instructions.
Wall hang bracket
1 For indoor unit installation on the wall.
Self tapping screw 5 x L50
5 For wall hang bracket installation
Screws 4 x L10
2
For adjustment the gap between indoor
unit and wall.
Wall support for outdoor unit
( Only for domestic market )
1 To mount outdoor unit on the wall
Floor support for outdoor unit
( Only for domestic market )
1
To mount outdoor unit on the ground
or floor
Insulated refrigerant piping
lines with flare nuts of
lengths 3 meter
( Only for domestic market )
1
To connect refrigerant between outdoor
and indoor units and refrigerant piping
lines
11.2 STANDARD INSTALLATION ACCESSORIES SUPPLIED FROM THE FACTORY
( Only for Export markets )
DESCREPTION SHAPE QTY USE
Flare nuts ( 1/2” & 1/4" )
supplied with outdoor unit
38QPCT18
1 + 1
To be mounted on the refrigerant piping
lines before being connected to the
outdoor unit.
Flare nuts ( 5/8” & 1/4" )
supplied with outdoor unit
38QPCT24
1 + 1
To be mounted on the refrigerant piping
lines before being connected to the
outdoor unit.
Flare nuts ( 1/2” & 1/4" )
supplied with indoor unit
42QPCT18
1 + 1
To be mounted on the refrigerant piping
lines before being connected to the
indoor unit.
Flare nuts ( 5/8” & 1/4" )
supplied with indoor unit
42QPCT24
1 + 1
To be mounted on the refrigerant piping
lines before being connected to the
indoor unit .
To Next Page
Loading...
