16
13. INDOOR UNIT INSTALLATION
13.1 PREPARATION STEPS OF INDOOR UNIT BEFORE INSTALLATION
a. Put packed unit as shown.
Remove plastic strap (item 1) from
cardboard.
d. Lift front panel to the top of the unit
with both hands and it will be
automatically separated from unit.
b. Slide unit from carton (item 1)
Lift unit with Styrofoam
Parts from carton box
Remove Styrofoam parts
• By pulling right and left
Styrofoam you will find small carton box
containing electrical connection cords and
remote control with its accessories.
• Turn the unit up, you will find the
mounting bracket.
e. Remove the plastic cover of the
terminal block and clamp wire by
removing the fixing screws.
c. Remove the screw-fixing wall
mounting bracket with the unit.
Remove the wall-mounting bracket from the
unit by pushing up the indicated marks ( ▲)
at the bottom of the body.
1
3
2
Removal of wall hang bracket
REMOVE SCREW
To Next Page
Loading...
