To Next PageTo Next Page
Need help?Do you have a question about the Carrier 42QPCT18H-708F and is the answer not in the manual?
General| Refrigerant | R410A |
|---|---|
| Phase | 1 |
| Indoor Unit Type | Wall Mounted |
| Indoor Unit Weight | 22 lbs |
| Outdoor Unit Weight | 77 lbs |
| Cooling Capacity | 18000 BTU/h |
| Heating Capacity | 18000 BTU/h |
Specifies required clearances around the outdoor unit for single installations.
Specifies required clearances for serial outdoor unit installations.
Steps to prepare the indoor unit before mounting it.
Step-by-step instructions for mounting the indoor unit.
Steps to prepare the outdoor unit before mounting.
Instructions for assembling and mounting the wall support for the outdoor unit.
Detailed instructions on connecting refrigerant piping lines correctly.
Guidance on using refrigerant piping lines based on unit configuration.
Instructions for calculating and adding refrigerant charge.
Step-by-step guide for preparing piping lines before making connections.
Introduction to air purging procedures for the system.
Explains the necessity and effects of air in the refrigeration circuit.
Details the air purging method using refrigerant from the outdoor unit.
Details the air purging method using a vacuum pump.
Methods for checking refrigerant leakage after connections.
Details wiring between the power supply and the unit's circuit breaker.
Details wiring between indoor, outdoor units and the circuit breaker.
