Fig. 9 — 42SM Mega Furred-In Stack Dimensions
NOTES:
1. Unit measurements on drawings are shown in inches (millimeters).
2. Units are fabricated of galvanized steel with a 16 gage galvanized fan deck.
3. Blower, motor, valves, coil, and filter are accessible through the return air opening.
4. Unit and control box are insulated with
1
/
2
-in. (13 mm) coated fiberglass insulation.
5. Maximum riser size is 2
1
/
2
-in. (64 mm) diameter. If larger sizes are required, please
consult the factory.
6. This drawing is pictorial. (See unit arrangements for actual supply and return air
orientation.)
7. Riser length = [floor to floor + 2-in. (51 mm)]. Maximum riser length is 119-in.
(3023 mm).
8. Unit shipping weight is approximately 390 lb (176 kg).
LEGEND
CR — Cold Water Return
CS — Cold Water Supply
D—Drain
HR — Hot Water Return
HS — Hot Water Supply
PSC — Permanent Split Capacitor
SWT— Sweat
To Next Page
Loading...
