6
Before performing the installation, read these instructions carefully to ensure that you are
familiar with the specifications of the unit.
The dimensions and weight of the unit can be found in the cover page.
The rules presented below are applicable to all installations:
a) Prepare a careful plan of the positions of the units to prevent possible interference with
any kind of pre-existing (or scheduled) equipment or facilities, such as electrical installations,
water mains, sewerage systems, etc.
b) Install the unit where it is free of any kind of obstruction of the air circulation, both in the air
intake and the air discharge.
c) Select a location with sufficient space to permit repairs and general maintenance work.
d) The location must permit the routing of the pipes (system pipes, electrical wiring and
drainage).
e) The unit must be level after installation.
4.3 Installing the Indoor Units
4.3.1 GENERAL RECOMMENDATIONS
Fig. 4 - Dimensions of the Indoor Unit
Dimensions (mm)
Model No. X Y Z
42XQ/XQA 020, 025 & 004*, 006* 1020 934 964
42XQ/XQA 030, 040 & 007*, 008*, 010* 1200 1114 1144
42XQ/XQA 050, 060 & 012*, 014* 1650 1564 1594
*Model code for Thailand market only (50Hz)
To Next Page
Loading...
Need help?
General
