NOTE
• The maximum distance for the
infrared remote control to work
properly is 5 metres.
• There must be no objects, for
example, curtains, obstructing the
space between the unit and the
remote control.
NOTE
• Sunlight shinning directly onto the
signal reception area of the unit
may cause difficulties in receiving
the signal emitted by the remote
control.
• The remote control must be pointed
towards the device’s signal
reception area when you press the
desired button.
• The electronic control system emits
an acoustic signal (beep) to confirm
the reception of the emitted
message.
Reading on the display or viewfinder
A. Operating mode selection button
B. ON/OFF button – Connect/disconnect
C. Button for increasing the selected temperature
D. Button for reducing the selected temperature
E. Fan speed selection button
F. Customized control button
G. Customized selections button
H. Deflector control button
I. Button for connecting the timer (ON)
J. Button for the daily timer (DAILY)
K. Button for canceling the timer setting
L. Button for disconnecting the time (OFF)
M. Button for setting the night operating mode
(SLEEP)
N. Button for setting the time
O. Reset button
9
To Next Page
Loading...
