REMOTE CONTROL
REMOTE CONTROL
The remote control works with 1.5 V
batteries. When the battery icon appears on
the display of the remote control, it’s time to
replace the old batteries.
Inserting the batteries
• Open the battery compartment on the
back of the remote control. To remove the
small cover, press down the small tab in
the direction indicated by the arrow in the
diagram.
• Remove the old batteries and insert new
ones. The remote control requires two
batteries (1.5V type AAA).
• Press the “o” button with a sharp-pointed
object to reset the remote control.
CAUTION
!
Before replacing the batteries, the
device must be disconnected.
NOTE
• The average life of the batteries
under normal conditions of use is
approximately one year.
• If the air conditioner does not
function as normal after the
remote control batteries have
been replaced, remove the
batteries again, reinsert them and
press the “o” button again after 5
seconds
8
To Next Page
Loading...
