Carrier 48LC Series - Page 137

137
IDF_DIAG
Commanded IDF Speed 0 to 100 % FANSPEED
IDF VFD Actual Speed % 0 to 100 % MAV
Requested IDF Speed 0 to 100 % RQFANSPD
IDF Speed Override Flag On/Off FAN_OVRD
IDF Speed Reduction On Yes/No FANRED10
IDF Operation Errors? Yes/No IDFBAD
IDF VFD Fault Detail
0=NONE,
1=PWR CARD,
2=EARTH FLT,
3=CTRL WORD,
4=OVER CURR,
5=OVER TEMP,
6=OVERLOAD,
7=UNDERVOLT,
8=OVER VOLT,
9=SHORT CIR,
10=PHASELOSS,
11=U LOSS,
12=V LOSS,
13=W LOSS,
14=CTRL VOLT,
15=VDD LOW,
16=MULTIPLE,
17=UNEXPECT
SVFDFLT
IDF VFD Warning Detail
0=NONE,
1=VOLTAGE,
2=CURRENT,
3=THERMAL,
4=MULTIPLE,
5=UNEXPECT
SVFDWAR
IDF VFD Motor Run Hours xxxxxxxx hours VFDMHOUR
IDF VFD Cumulative kWh n to 0 kWh KWHCNTR
IDF VFD Alarm Word xxxxxxxx ALMERRC
IDF VFD Reference Speed 0 to 100 % REFSPEED
IDF VFD Output Power kW 0 to 1000 kW OUTPWRKW
IDF VFD Output Power hp 0 to 1000 OUTPWRHP
IDF VFD Output Voltage 0 to 65535 volts OUTMVOLT
IDF VFD Output Freq. 0 to 6553.5 Hz OUTMFREQ
IDF VFD Output Amps 0 to 655.35 Amps OUTMCUR
IDF VFD DC Bus Voltage 0 to 700 volts DCLNVOLT
IDF VFD Heatsink Temp –198.4 to 260.6 °F HTSINKT
IDF VFD Status Word xxxxx VFD1STSW
USB_DIAG
USB TREND STATUS
0=IDLE,
1=TRENDING,
2=NO POINTS,
3=USB FULL
TRNDSTAT
USB TREND DURATION
0=1 MINUTE,
1=5 MINUTES,
2=15 MINUTES,
3=30 MINUTES,
4=1 HOUR,
5=3 HOURS,
6=8 HOURS,
7=12 HOURS,
8=1 DAYS,
9=1.5 DAYS,
10=2 DAYS,
11=3 DAYS,
12=5 DAYS,
13=1 WEEK,
14=2 WEEK,
15=4 WEEK,
16=USB FULL
TRNDDUR Yes
USB TREND RATE 1 to 300 TRNDRATE Yes
USB TREND POINTS FROM
0=FILE,
1=LIST
TRNDPNTS Yes
TREND FILE SEARCH text string TRNDFILE
TREND EQUIP PERFORMANCE On/Off TRNDEQPR Yes
TREND COOL PERFORMANCE On/Off TRNDCLPR Yes
TREND HEAT PERFORMANCE On/Off TRNDHTPR Yes
TREND COOLING DIAGNOSTIC On/Off TRNDCLDG Yes
TREND IDF DIAGNOSTIC On/Off TRNDIDF Yes
Table T — MAINTENANCE TABLES (cont)
TABLE DISPLAY NAME RANGE UNITS POINT NAME
WRITE
STATUS
APPENDIX D — SYSTEMVU™ CONTROLLER CCN TABLES