Carrier 50FF 020 - Page 28

28
7 - POSITIONING AND INSTALLATION
7.7 - Recommended service clearance
Important: This is the minimum space required for maintenance operations and access inside the unit. Depending on the assembly
selected for the unit and the characteristics of the installation site, a larger space around it may be required to ensure proper air
circulation and therefore the correct operation of the unit.
A
B
C
D
A
B
C
D
NOTE:
- Unit not designed to have overhead obstruction.
A
B
C
D
A
B
C
D
50FF/FC 052-058-062-070-074-086-093: B1, B2 and BF assemblies
50FF/FC 052-058-062-070-074-086-093: BW assembly
50FF/FC 052-058-062-070-074-086-093: B3, BX, BP and BA assemblies
50FF/FC 052-058-062-070-074-086-093: BT and BB assemblies
50FF/FC
Overall dimension (mm) Service clearance (mm)
Length Width Height A B C D
052 to 062 3.000 2.200 1.230 1.600 1.000 1.000 1.000
070 to 093 3.650 2.200 1.230 2.000 1.000 1.000 1.000
50FF/FC
Overall dimension (mm) Service clearance (mm)
Length Width Height A B C D
052 to 062 3.000 2.205 1.905 1.600 1.000 1.000 1.000
070 to 093 3.655 2.205 1.905 2.000 1.000 1.000 1.000
50FF/FC
Overall dimension (mm) Service clearance (mm)
Length Width Height A B C D
052 to 062 3.000 2.210 1.995 1.600 1.000 1.000 1.000
070 to 093 3.655 2.210 1.995 2.000 1.000 1.000 1.000
50FF/FC
Overall dimension (mm) Service clearance (mm)
Length Width Height A B C D
052 to 062 3.000 3.015 1.905 1.600 1.000 1.000 1.000
070 to 093 3.655 3.015 1.905 2.000 1.000 1.000 1000