How to troubleshoot a Carrier Heat Pump that does not switch on?
If your Carrier Heat Pump unit doesn't switch on and the power LED on the main board is off, check the following: 1. Ensure the unit is receiving main power. 2. Verify the transformer output voltage is 24 Vac/Vdc. 3. Confirm the power supply connector at 24 Vac/Vdc is correctly inserted. 4. Inspect the overload fuse to ensure it is intact.
What to do if Carrier Heat Pump LCD shows strange characters or a blank display?
If you're experiencing general LCD problems (strange characters, blank display) when switching on your Carrier Heat Pump, check the following: 1. Ensure the software in the flash is correct. 2. Verify the pLAN address of the pCOc and on the terminal, ensuring they comply with the requirements of the current application. 3. Check the connection between the Graphic terminal and the ?PC MEDIUM board.
What to do if my Carrier 50FF completely stops?
If your Carrier Air Conditioner stops completely, first, check the faults and alerts list to understand why it shut down. After identifying and fixing the issue, restart the unit. It's recommended to diagnose the unit in Service Test mode before running it normally and reset any faults before the control function can operate.
What does Fault F010 mean on my Carrier Air Conditioner?
Fault F010 on your Carrier Air Conditioner indicates a low voltage issue, possibly due to a brownout, low supply voltage, or a missing phase in the supply power. The control system will shut down the unit, but it should automatically clear once the supply voltage rises above 19 volts AC.
What does Fault F011 mean on my Carrier Air Conditioner?
Fault F011 indicates that the MBB reference voltage is out of range, usually due to an MBB failure or the supply voltage being out of range. The control system will shut down the unit. This fault should automatically clear when the DC reference voltage returns to its normal range.
What does Alert A012 mean on my Carrier Air Conditioner?
Alert A012 on your Carrier Air Conditioner signals an MBB zero crossing issue, often caused by an MBB failure or the supply voltage frequency being too high or too low. The alert should automatically clear once the supply voltage returns to the normal range.
What does Fault F013 mean on my Carrier Air Conditioner?
Fault F013 on your Carrier Air Conditioner indicates that MBB Fuse 2 is open, typically due to a wiring error in a switch input or the switch pulling too much current. The control will shut down the unit, but the fault should automatically clear when the fuse temperature returns to normal.
What does Fault F014 mean on my Carrier Air Conditioner?
Fault F014 on your Carrier Air Conditioner means that MBB Fuse 3 is open. This is usually caused by a wiring error in a switch input or the switch drawing too much current. The control system will shut down the unit, and the fault should clear automatically once the fuse temperature is back in the normal range.
What does Alert A015 mean on my Carrier Air Conditioner?
Alert A015 on your Carrier Air Conditioner indicates that the MBB RNET voltage is out of range, generally due to an MBB failure or the supply voltage being out of range. The alert should automatically clear when the voltage returns to its normal range.
What does Alert A016 mean on my Carrier 50FF?
Alert A016 on your Carrier Air Conditioner indicates that the MBB 24VDC voltage is out of range, usually due to an MBB failure or the supply voltage being out of range. When this alert is active, Analog Input numbers 6, 7, and 8 will be in error. The alert should automatically clear when the voltage rises above 19 volts DC.
General| Series | 50FF |
|---|---|
| Refrigerant | R-410A |
| Product Type | Air Conditioner |
| Cooling Capacity | 1.5 to 5 Tons |
| Operating Voltage | 208/230V |
| Dimensions (H x W x D) | Varies by model |
| Weight | Varies by model |
To Next Page
