To Next PageTo Next PageWhat does Fault F010 mean on my Carrier Air Conditioner?
Fault F010 on your Carrier Air Conditioner indicates a low voltage issue, possibly due to a brownout, low supply voltage, or a missing phase in the supply power. The control system will shut down the unit, but it should automatically clear once the supply voltage rises above 19 volts AC.
What to do if my Carrier 50FF completely stops?
If your Carrier Air Conditioner stops completely, first, check the faults and alerts list to understand why it shut down. After identifying and fixing the issue, restart the unit. It's recommended to diagnose the unit in Service Test mode before running it normally and reset any faults before the control function can operate.
What to do if Carrier Heat Pump LCD shows strange characters or a blank display?
If you're experiencing general LCD problems (strange characters, blank display) when switching on your Carrier Heat Pump, check the following: 1. Ensure the software in the flash is correct. 2. Verify the pLAN address of the pCOc and on the terminal, ensuring they comply with the requirements of the current application. 3. Check the connection between the Graphic terminal and the ?PC MEDIUM board.
General| Series | 50FF |
|---|---|
| Refrigerant | R-410A |
| Product Type | Air Conditioner |
| Cooling Capacity | 1.5 to 5 Tons |
| Operating Voltage | 208/230V |
| Dimensions (H x W x D) | Varies by model |
| Weight | Varies by model |
