Fig. 3 — Dimensions; Sizes 048,060
UNIT
ELECTRICAL
CHARACTERISTICS
UNIT WT CORNER WT (Kg/Lb)
Kg Lb A B C D
50HS048 400-3-50 165 363 38/83 43/95 54/118 30/67
50HS060 400-3-50 168 370 40/89 42/92 48/105 38/84
REQ’D CLEARANCES FOR SERVICING — mm (in.)
Indoor Coil Access Side ...................762(30)
Control Box Access Side ..................762(30)
Unit Top ...........................914(36)
Side Opposite Ducts ....................762(30)
REQ’D CLEARANCES TO COMBUSTIBLE MAT’L — mm (in.)
Unit Top ...............................0
Duct Side of Unit ..........................0
Side Opposite Ducts ........................0
Bottom of Unit ...........................0
Vertical Discharge, First 305 mm (12 in.) of Supply Duct . . . 25 (1)
UNIT
CENTER OF GRAVITY (mm/in.)
XYZ
50HS048 543/21.4 540/21.3 440/17.3
50HS060 493/19.4 539/21.2 440/17.3
LEGEND
CG — Center of Gravity
MAT’L — Material
REQ’D — Required
NOTES:
1. Clearances must be maintained to prevent recirculation of air from
outdoor-fan discharge.
2. Dimensions in ( ) are in millimeters unless otherwise noted.
4
To Next Page
Loading...
