Carrier 50TCMD12 - Page 9

 'LPHQVLRQV7&.%
C
B
A
D
6HUYLFH&OHDUDQFH
/2& ',0(16,21 &21',7,21
A
48--- in (1219 mm) Unit disconnect is mounted on panel
36--- in (914 mm) I f d i m e n s i o n --- B i s 1 2 --- i n ( 3 0 5 m m )
18--- in (457 mm) No disconnect, convenience outlet option
18--- in (457 mm) Recommended service clearance (use electric screwdriver)
12--- in (305 mm) Minimum clearance (use manual ratchet screwdriver)
B 12--- in (305 mm) I f d i m e n s i o n --- A i s 3 6 --- i n ( 9 1 4 m m )
Special Check for sources of flue products within 10 --- ft of unit fresh air intake hood
C
36--- in (914 mm) Side condensate drain is used
18--- in (457 mm) Minimum clearance
D
42--- in (1067 mm) Surface behind servicer is grounded (e.g., metal, masonry wall, another unit)
36--- in (914 mm) Surface behind servicer is electrically non --- conductive (e.g ., wood, fiberglass)
5$.%
5$.%
&85%6:(,*+76',0(16,2167&0' (cont.)
Page 9