Carrier 53KHET 12 - Installation Accessories; Standard Factory Supplied Accessories; Export Market Accessories

13
11. INSTALLATION ACCESSORIES
11.1 STANDARD INSTALLATION ACCESSORIES SUPPLIED FROM THE FACTORY
DESCREPTION SHAPE QTY USE
Battery 1.5 volt size AAA
alkaline type
2 To operate the wireless remote control
Wireless remote control 1 To operate the air conditioner
Owner manual 1
To illustrate control functions
of operation
Installation Manual 1 To illustrate installation instructions.
Wall hang bracket 1 For indoor unit installation on the wall.
Wall support for outdoor unit
( Only for domestic market )
1 To mount outdoor unit on the wall
Floor support for outdoor unit
( Only for domestic market )
1
To mount outdoor unit on the ground
or floor
Insulated refrigerant piping lines
with flare nuts of length 3 meter
( Only for domestic market )
1
To connect refrigerant between
outdoor and indoor units and
refrigerant piping lines
11.2 STANDARD INSTALLATION ACCESSORIES SUPPLIED FROM THE FACTORY
( Only for export markets )
DESCREPTION SHAPE QTY USE
Flare nuts ( 3/8" & 1/4" )
supplied with outdoor units
38KHET12 & 38QHET12
1 + 1
To be mounted on the refrigerant
piping lines before being connected
to the outdoor unit.
Flare nuts ( 1/2" & 1/4" )
supplied with outdoor units
38KHET18 & 38QHET18
1 + 1
To be mounted on the refrigerant
piping lines before being connected
to the outdoor unit.
Flare nuts ( 5/8" & 3/8" )
supplied with outdoor units
38KHET24 & 38QHET24
1 + 1
To be mounted on the refrigerant
piping lines before being connected
to the outdoor unit.