12
* Rigging weights are for standard Super B5LSL and Super C5 tubes
of standard wall thickness (0.025-in. [0.635 mm] wall) and do not in-
clude refrigerant weight.
† See Model Number Nomenclature on page 5.
NOTES:
1. Evaporator weight includes two-pass Victaulic dished heads.
2. Condenser weight includes the high side float chamber, discharge
pipe, and two-pass Victaulic dished heads; does not include econo-
mizer weight.
H49 11218 9211 900 590 2657 2121
H2A 9025 — 700 — 2111 —
H2B 9149 — 707 — 2195 —
H2C 9294 7294 716 431 2293 1852
H2D 9453 7532 726 439 2400 1991
H2E 9623 7791 736 448 2514 2143
H2F 8990 — 700 — 2088 —
H2G 9115 — 707 — 2172 —
H2H 9253 7210 716 431 2266 1802
H2J 9402 7425 726 439 2363 1929
H2K 9568 7675 736 448 2477 2075
H4A 9692 — 795 — 2218 —
H4B 9835 — 803 — 2313 —
H4C 10002 7889 813 499 2424 2025
H4D 10185 8163 824 508 2546 2183
H4E 10381 8461 836 518 2676 2356
H4F 9652 — 795 — 2191 —
H4G 9795 — 803 — 2286 —
H4H 9956 7792 813 499 2393 1969
H4J 10126 8040 824 508 2504 2113
H4K 10318 8327 836 518 2634 2279
Table 6 — 19DV Two-Stage Compressor Frame Size DV4
Heat Exchanger Weights (English)(cont)
CODE†
DRY RIGGING WEIGHT (LB)* REFRIGERANT WEIGHT (LB) WATER WEIGHT (LB)
EVAPORATOR
ONLY
CONDENSER
ONLY
EVAPORATOR
ONLY
CONDENSER
ONLY
EVAPORATOR
ONLY
CONDENSER
ONLY
To Next Page
Loading...
