Carrier AquaEdge 19DV series - Page 17

17
Fig. 8 — 19DV Machine Footprint
NOTES:
1. A-A dimension refers to accessory soleplate. See page 19.
2. B-B dimension refers to standard support plate. See page 19.
DIMENSION C DIMENSION D DIMENSION E DIMENSION F DIMENSION G DIMENSION H
ft-in. mm ft-in. mm ft-in. mm ft-in. mm ft-in. mm ft-in. mm
G2* 13'-0 1/4" (3969) 12'-3 1/2" (3747) 6'-1 3/4" (1873) 4'-1 7/8" (1267) 1'-8 3/4" (530) 8'-1 3/4" (2483)
G4* 14'-8 3/4" (4489) 14'-0" (4267) 7'-0" (2134) 4'-1 7/8" (1267) 1'-8 3/4" (530) 8'-1 3/4" (2483)
H2* 13'-0 1/4" (3969) 12'-3 1/2" (3747) 6'-1 3/4" (1873) 4'-5 3/4" (1365) 1'-10 1/4" (565) 8'-9 1/4" (2673)
H4* 14'-8 3/4" (4489) 14'-0" (4267) 7'-0" (2134) 4'-5 3/4" (1365) 1'-10 1/4" (565) 8'-9 1/4" (2673)