Carrier AquaEdge 19XR series - Page 156

156
Fig. 65 — Benshaw, Inc. Solid-State Unit Mounted Starter Wiring Schematic
NOTES:
LED status with power applied and prior to RUN command.
Transformer T1 primary fuses FU1/FU2 value dependent on
system voltage and model, per Chart 1. Transformer connec-
tions per transformer nameplate connection diagram.
CT1-CT3 are sized per Chart 2.
Optional for all starters.
CT7-CTI2 are optional for all starters.
Circuit breaker CB2 rated at 30 amps for models 19XRA,
19XRC, 19XTR.
1
2
3
4
5
6
"ON"
"OFF "
7
8
9