NOTE: Unit sizes 315-390 are modular units that are shipped
in separate sections as 1nodules A or B as noted in position 8 of
the unit model nomenclature. Installation directions specific to
these units are noted in these instructions. For modules 315A,
315B, 330A, 330B, 345A, 345B, and 360B, follow all general
instructions as noted for unit sizes 30RB 160-170. For modules,
360A, 390A, and 390B follow instructions for 30RB190. See
Table 1for a listing of unit sizes and 1nodular combinations.
NOTE: The nameplate for modular units contains only the first
two digits in the model nulnber. For example, 315A and 315B
name plates read 31A and 3 lB.
Table 1 -- Modular Combinations
MODULE UNITS MODULE A MODULE B
30RBA315 30RBA160 30RBA160
30RBA330 30RBA170 30RBA160
30RBA345 30RBA170 30RBA170
30RBA360 30RBA190 30RBA170
30RBA390 30RBA190 30RBA190
NOTE: An "A" in the model number indicates the design series.
Inspect the unit upon arrival tbr damage. If damage is
found, file a claim right away with the shipping company.
When considering location for the unit, be sure to consult
National Electrical Code (NEC, U.S.A.) and local code
requirelnents. Allow sufficient space for airflo,a; wiring,
piping, and service. See Fig. 2-13. Be sure surface beneath the
unit is level, and is capable of supporting the operating weight
of the unit. See Fig. 14 and Tables 2A-3B for unit mounting
and operating weights.
NOTE: To facilitate refrigerant vent piping all units have
fusible plugs with 1/4 in. SAE (Society of Automotive
Engineers) flares if required by local codes.
To Next Page
Loading...