Need help?Do you have a question about the Carrier AquaSnap Plus 30AWH008XB and is the answer not in the manual?
General| Model | 30AWH008XB |
|---|---|
| Category | Heat Pump |
| Brand | Carrier |
| Series | AquaSnap Plus |
| Heating Capacity (kW) | 8.5 |
| Energy Efficiency Ratio (EER) | 3.2 |
| Refrigerant Type | R-410A |
| Power Supply | 400V/3Ph/50Hz |
| Operating Temperature Range (Cooling) | 10°C to 46°C |
| Operating Temperature Range (Heating) | -15 to 20 °C |
Proper placement of the outdoor unit for optimal performance and minimal disturbance.
Guidelines and procedures for connecting the unit's water circuits.
Instructions for making safe and correct electrical connections.
Steps to configure and verify the system's operation.
Criteria for selecting an optimal outdoor location for the unit.
Essential safety measures for electrical connections to prevent hazards.
Proper grounding and wiring procedures for electrical connections.
Details on unit power supply, voltage, current, fuses, and cables.
Explains LED indications for diagnosing inverter board errors.
Table correlating LED status with specific error causes.
Details inverter board alarm codes and their meanings.
Lists various error codes and their corresponding descriptions.
Explains alarm codes indicated by the GMC board's LED.
Lists safety devices and their operating parameters.
Covers cleaning coil and refrigerant charge check.
To Next Page