Carrier AquaSnap 30AWH-R User Manual

Installation and operation manual
R32 Air-to-water Monobloc Wired controller

Carrier AquaSnap 30AWH-R Specifications

General

Model	30AWH-R
Category	Heat Pump
Refrigerant	R-410A
Type	Air-Cooled
Compressor Type	Scroll
Operating Temperature Range (Cooling)	-5 to 48 °C
Energy Efficiency Ratio (EER)	3.0-3.2
Coefficient of Performance (COP)	3.2 - 3.5
Power Supply	380 - 415V, 3-phase, 50Hz
Weight	300 - 500 kg

Summary

1. Presentation

1.1. Interface introduction

Overview of the controller's interface and button layout.

1.1.2 Overview of Icons

Explanation of the various icons displayed on the controller screen.

1.2. Button introduction

Detailed description of the wired controller's buttons and their functions.

2. User operation

2.1. Clock setting

Step-by-step guide to setting the controller's date and time accurately.

2.2. ON-OFF setting

Instructions for turning the unit on and off using the controller.

2.3. Mode setting

Procedure for changing the operating mode, such as cooling or heating.

2.4. Current setpoint setting

Guide to adjusting temperature setpoints for different operational modes.

2.5. Home/away/eco setting

How to optimize energy efficiency using occupancy and eco modes.

2.6. DHW schedule setting

Steps to program the Domestic Hot Water (DHW) operating schedule.

2.7. Button lock settings

Instructions on how to lock controller buttons to prevent accidental changes.

3. Configuration

3.1. User parameter configuration

Configuration of user-specific parameters and system settings.

3.2. Technical parameter configuration

Detailed technical parameters for advanced system configuration.

4. Parameter and status checking

5. Error code