Carrier AquaSnap 30AWH-R - 2. User operation; 2.1. Clock setting

5
English
2.1.Clocksetting
Before usage, it is necessary to set the time and date of the wired controller. Please follow the steps below to set the
clock accurately:
1.Pressthe“setting”button,thenpress“conrm”buttontoenterdaysettings;thedatewillashatthismoment.
2. Next, press the “up” or “down” button to change the date, if necessary;
3.Aftersettingthedate,pressthe“conrm”buttontoentertimesettings.Thehourwillashatthismoment.
4. Next, press the “up” or “down” button to set the correct time in hours;
5.Aftersettingthehour,pressthe“conrm”buttontoenterthe“minutes”setting;theminuteswillashatthismoment.
2. User operation