Carrier ClassiCOOL 53KDHT60N-518 - Test Running Procedures; Notes for Test Running; Cooling Test Running Procedure

47
20. SETTING OF SWITCHES
Switch ENC2 : for Setting Static Pressure Range of Indoor Unit
Switch ENC2 of the PCB of indoor unit is factory used to set the Setting Static Pressure Range
of indoor unit as per the unit model
Ducted
Indoor Unit Model
ENC2 Factory Setting
Code
Setting
42KDHT60N-718
0
42KDHT72N-718
42KDHT84N-718
42KDHT90N-718
1
Example : Ducted split system 53KDHT60N-518
Switch ENC2 is factory set at code 0
Static Pressure Range 0 ~ 50 Pascal