Carrier ComfortLink 30GXN - Page 139

CL-9
CUT ALONG DOTTED LINE CUT ALONG DOTTED LINE
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
ALL UNITS:
Record the following information from the Pressures and Temperatures Modes when machine is in a stable operation
condition.
COOLER ENTERING FLUID ____________________
COOLER LEAVING FLUID ____________________
OUTSIDE AIR TEMPERATURE ____________________
SPACE TEMPERATURE ____________________
CONDENSER ENTERING FLUID ____________________
CONDENSER LEAVING FLUID ____________________
LEAD/LAG LEAVING FLUID ____________________
CIRCUIT A CIRCUIT B
SATURATED CONDENSING TEMP _____________________ ____________________
SATURATED SUCTION TEMP _____________________ ____________________
DISCHARGE SUPERHEAT TEMP (Comp 1/Comp 2) _____________________ ____________________
MOTOR TEMPERATURE (Comp 1/Comp 2) _____________________ ____________________
DISCHARGE PRESSURE _____________________ ____________________
SUCTION PRESSURE _____________________ ____________________
ECONOMIZER PRESSURE _____________________ ____________________
OIL PRESSURE (Comp 1/Comp 2) _____________________ ____________________
OIL PRESSURE DIFF. (Comp 1/Comp 2) _____________________ ____________________
OIL FILTER DIFF. (Comp 1/Comp 2) _____________________ ____________________
CALCULATED OIL PRESS (Comp 1/Comp 2) _____________________ ____________________
Compressor Running Current — All readings taken at full load.
L1 L2 L3
Compressor A1 _____ _____ _____
Compressor A2 _____ _____ _____
Compressor B1 _____ _____ _____
Compressor B2 _____ _____ _____
Condenser Fan Motor Current
L1 L2 L3
Fan Motor 1 _____ _____ _____
Fan Motor 2 _____ _____ _____
Fan Motor 3 _____ _____ _____
Fan Motor 4 _____ _____ _____
Fan Motor 5 _____ _____ _____
Fan Motor 6 _____ _____ _____
Fan Motor 7 _____ _____ _____
Fan Motor 8 _____ _____ _____
Fan Motor 9 _____ _____ _____
Fan Motor 10 _____ _____ _____
Fan Motor 11 _____ _____ _____
Fan Motor 12 _____ _____ _____
Fan Motor 13 _____ _____ _____
Fan Motor 14 _____ _____ _____
Fan Motor 15 _____ _____ _____
Fan Motor 16 _____ _____ _____