Carrier ComfortLink 6 Series - RESETCON: Options Configuration; SCHEDOVR: Schedule and Timed Override Configuration

119
APPENDIX G (cont)
RESETCON: Options Configuration
SCHEDOVR: Schedule and Timed Override Configuration
DESCRIPTION STATUS DEFAULT UNITS POINT
COOLING RESET
Cooling Reset Type 0 = No Reset
1=4to20mAInput
2=ExternalTemp—OAT
3=ReturnFluid
4 = External Temp — SPT
0 CRST_TYP
4-20 MA RESET
4-20 — Degrees Reset –30 to +30 0 ^F C420_DEG
REMOTE RESET
Remote — No Reset Temp 0 to 125 125 dF CREM_NO
Remote — Full Reset Temp 0to125 0 dF CREM_FUL
Remote — Degrees Reset –30 to +30 0 ^F CREM_DEG
RETURN TEMPERATURE RESET
Return — No Reset Temp 0to30 10 ^F CRTN_NO
Return — Full Reset Temp 0to10 0 ^F CRTN_FUL
Return — Degrees Reset –30 to +30 0 ^F CRTN_DEG
HEATING RESET
Heating Reset Type 0 = No Reset
1=4to20mAInput
2=ExternalTemp—OAT
3=ReturnFluid
4 = External Temp — SPT
0 HRST_TYP
4-20 MA RESET
4-20 — Degrees Reset –30 to +30 0 ^F H420_DEG
REMOTE RESET
Remote — No Reset Temp 0 to 125 50 dF HREM_NO
Remote — Full Reset Temp 0to125 80 dF HREM_FUL
Remote — Degrees Reset –30 to +30 0 ^F HREM_DEG
RETURN TEMPERATURE RESET
Return — No Reset Temp 0to10 10 ^F HRTN_NO
Return — Full Reset Temp 0to30 0 ^F HRTN_FUL
Return — Degrees Reset –30 to +30 0 ^F HRTN_DEG
DEMAND LIMIT
Demand Limit Select 0 = None
1 = External Switch Input
2=4to20mAInput
3 = Loadshed
0DMD_CTRL
DemandLimitat20mA 0to100 100 % DMT20MA
Loadshed Group Number 0to99 0 SHED_NUM
Loadshed Demand Delta 0 to 60 0 % SHED_DEL
Maximum Loadshed Time 0to120 60 min SHED_TIM
Demand Limit Switch 1 0to100 80 % DLSWSP1
Demand Limit Switch 2 0to100 50 % DLSWSP2
LEAD/LAG
Lead/Lag Chiller Enable Disable/Enable Disable LL_ENA
Master/Slave Select Slave/Master Master MS_SEL
Slave Address 0to239 2 SLV_ADDR
Lead/Lag Balance Select 0 = Master Leads
1 = Slave Leads
2 = Automatic
0 LL_BAL
Lead/Lag Balance Delta 40 to 400 168 hours LL_BAL_D
Lag Start Delay 0to30 5 min LL_DELAY
Parallel Configuration Yes/No No PARALLEL
DESCRIPTION STATUS DEFAULT UNITS POINT
Schedule Number 0 - 99 0 SCHEDNUM
Override Time Limit 0 - 4 0 hours OTL
Timed Override Hours 0 - 4 0 hours OVR_EXT
Timed Override Yes/No No TIMEOVER