Carrier ComfortVu TB-24-HM - Turning the Thermostat on and off; Selecting Temperature Scale; Adjusting the Setpoint Temperature (for 1 Setpoint and 2 Setpoints Configurations)

Operating instructions (cont.)
Turning the thermostat ON and OFF
Press the [On/Off] button to turn the thermostat ON or OFF.
Selecting temperature scale
In One setpoint configuration:
1. Press the [+] or [-] buttons once to view the setpoint temperature.
2. Press again to adjust the setpoint.
In Two setpoints configuration:
1. Press the [+] or [-] buttons once – “ ” and the setpoint temperature for cooling will
appear on display.
2. Use the [+] or [-] button to adjust the setpoint for cooling.
3. Press the [Mode] button or wait 3 seconds – “ ” and the setpoint temperature for heating
will appear on display.
4. Use the [+] or [-] button to adjust the setpoint for heating.
Notes:
 The setpoint for cooling must be higher than the setpoint for heating.
 For humidity setpoint, see Technician Setting P197.
OFFON
Celsius Fahrenheit
Adjusting the Setpoint temperature
Press the [C/F] button to switch between temperature scales.
Setpoint
Setpoint
For heating
Setpoint
For cooling
- 9 -