( ) 17
USE OF REMOTE CONTROL (Cont.)
ECO Function
ECO function is useful when you go to sleep.
Carrier air conditioner automatically controls the selected temperature
and consequently controls the room temperature to avoid overcooling
or overheating and to have comfortable and healthy sleep.
ECO function with COOL Mode
If you want to operate ECO function with Cool mode to save energy and
maintain the most comfortable temperature during COOL mode,
apply the following steps :
Start:
Press ECO button to activate ECO function.
• The fan speed will automatically change to low speed.
• The set temperature will be automatically increased by 1°C
after 1 hour after COOL mode is selected.
• Then the set temperature will be automatically increased by
another 1°C after additional 1 hour.
• This new temperature will be maintained steady for the next
5 hours, after that the system will stop operation.
Stop:
If you want to cancel ECO function, press Mode button,
Fan button or On/Off button is pressed.
ECO function with HEAT Mode
If you want to operate ECO function with Heat mode to save energy and
maintain the most comfortable temperature during HEAT mode,
apply the following steps :
Start:
Press ECO button to activate ECO function.
• The fan speed will automatically change to low speed.
• The set temperature will be automatically decreased by 1°C
after 1 hour after HEAT mode is selected.
• Then the set temperature will be automatically decreased by
another 1°C after additional 1 hour.
• This new temperature will be maintained steady for the next
5 hours, after that the system will stop operation.
Stop:
If you want to cancel ECO function, press Mode button,
Fan button or On/Off button is pressed.
ECO function with COOL mode
ECO function with HEAT mode
To Next Page
Loading...