Carrier DLFSOAH - Page 8

DLFSOAH: Installation Instructions
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
8
c. Connect the wire to the disconnect switch according to the
wire connecting diagram.
Fig. 6 — Connect wire to disconnect switch
d. Fasten and secure the cable body with a tie.
Fig. 7 — Fasten and secure the cable body
e. Install the disconnect switch cover and secure the two screws.
Fig. 8 — Reinstall the cover
3
2
1
TO OUTDOOR UNIT
TO INDOOR UNIT MAIN BOARD
1 2 3
Y/G
Disconnect
Switch
The ground wire should be tightened firmly.
WAR N I N G
Two screws