19
62--10601
FUNCTION CHANGE (PARAMETERS)
The following table has columns for Code and English displays.
English is the default setting. Change Functional Parameter to
Code to see Code display format.
Function Codes
CODE ENGLISH DATA
FN0 DEFR Defrost T ime Interval
FN1 ON HIGH AIR High Air Flow
FN1 OFF NORM AIR Normal Air Flow
FN2 OFF T Minimum Off-time
FN3 ON T Minimum On-time
FN4 A
REM
PROBE
Controlling Probe -
Return Air
FN4 B
SUP
PROBE
Dual Controlling Probe -
Return and Supply Air
FN5
Degrees
ForC
Temperature Unit
Displayed in _Cor_F
FN6 ON
TIME
STRT
Maximum Off-Time 30 Min
FN6 OFF
TEMP
STRT
Temperature and Minimum
Off-Time Based
Restarting For AutoStart/
Stop
FN7 MOP STD Unloader Control
FN10 ON AUTO OP Auto Start Operation
FN1 0 OFF MAN OP Manual Start Operation
FN11 TRANGE Out-of-Range Tolerance
Code vs English = Code or English display format
Manual Glow Override = Normal or Add 30sec
Alarm Reset = Alarm Reset or No Alarms
To Next Page
Loading...
