34
62--10601
FUSES
The fuses that protect the circuits of the Microprocessor control
system are located in the control box on the roadside of the unit.
They may be accessed by loosening the screws that hold the
control box cover closed. The cover can be removed and hung
below the control box by its tethers as shown below.
F1
Fuse Purpose Amps
F1 glow plug & starter solenoid 80A
F2 fuel heater (optional) 20A
F4 speed control solenoid & front unloader 15A
F5
auto restart, out of range lights
and SV3 (if equipped)
7.5A
F6 fault light and DataLink (if equipped) 5A
F9 Microprocessor 5A
F11 fuel solenoid, clutch & defrost light 10A
F12
SV1, SV2, SV4, heat & cool lights &
rear unloader
10A
To Next Page
Loading...
