GB - 5
ENGLISH
Cooling with dehumidification
In this way the desired room
temperature is automatically maintained.
To switch the unit off, turn the mode
selector counterclockwise to the
symbol
.
When the desired room temperature
is reached turn the thermostat
control knob counterclockwise until the
compressor switches off.
Set the thermostat to maximum
cooling by turning the control knob
clockwise.
3
4
5
The flexible hose should be positioned in one of the following ways:
A - with both hose ends inserted in the appropriate holes. In this case the unit must
be placed at least 500 mm away from the wall, as the air will be discharged at
the front and the back
B - vertical direction. In this case the air will be discharged from the front and from
the top part of the hose.
The dehumidification only function
should be used if you want to remove
moisture from the room air without
lowering the temperature.
1
2
The dehumidification indicator light
on the control panel is illuminated.
The air conditioner removes moisture
from the air without lowering the
temperature.
Turn the mode selector to the
dehumidification symbol.
Plug the unit in.
Open the air flow direction guide vane.
Dehumidification
10
11
12
To Next Page
Loading...
Need help?
General
