Carrier HRVXXSHA1130 - User Manual

User and Installer Manual
A200557
INSTALLER: READ THESE INSTRUCTIONS BEFORE INSTALLING UNIT.
SAVE THEM FOR THE USER.
RESIDENTIAL USE ONLY
REGISTER YOUR PRODUCT ONLINE AT: www.cac-bdp-all.com For additional information, https://www.hvacpartners.com/
A200637
65% SRE ERV Models are not ENERGY STAR certified
Consumer Information
A. To ensure quiet operation of the ENERGY STAR certified H/ERV, each product model must be installed using sound attenuation techniques
appropriate for the installation.
B. The way your heat/energy-recovery ventilator is installed can make a significant difference to the electrical energy you use. To minimize the
electricity use of the heat/energy-recovery ventilator, a stand-alone fully ducted installation is recommended. If you choose a simplified installation
that operates your furnace air handler for room-to-room ventilation, an electrically efficient furnace that has an electronically commutated (EC)
variable speed blower motor will minimize your electrical energy consumption and operating cost.
ERV & HRV
Fresh Air Systems
ERVXXSHA1130, ERVXXSVA1130, HRVXXSHA1130, HRVXXSVA1130
ERVXXSHA1150, ERVXXSVA1150, ERVXXSHB1145, ERVXXSVB1145
HRVXXSHA1160, HRVXXSVA1160, HRVXXSHB1160, HRVXXSVB1160

Carrier HRVXXSHA1130 Specifications

General

Brand	Carrier
Model	HRVXXSHA1130
Category	Air Cleaner
Language	English

Summary

Consumer Information

Product Limitations

General Safety Warnings

General Operational Cautions

Air Distribution

Installation

Locating and Mounting the Unit

Guidance on selecting optimal placement for the ventilation unit.

Installing the Ductwork and Registers

Fully Ducted System (T-1)

Installation details for a fully ducted system configuration.

Exhaust Ducted System (T-2)

Installation details for an exhaust ducted system configuration.

Connecting the Drain (HRV Only)

Simplified Installation (T-4)

Installing Dual Exterior Hood using Tandem Kit

Connecting Ducts to the Unit

Insulated Flexible Ducts

Procedure for connecting insulated flexible ducts to the unit ports.

Transitioning to 6-in. Ducts

Connections

Electrical Connection to Optional Main Wall Control

Wiring instructions for optional main wall controls.

Connection to Speed Selector and Premium Main Wall Control

Specifics for connecting main wall controls with various functions.

Electrical Connection to Auxiliary Wall Control

Electrical Connection to Bathroom Override Auxiliary Wall Control

Unit Operation using Furnace;AHU Thermostat

Unit Interconnection with Furnace;AHU

Synchronization with AHU Function

Infinity;Evolution Control

Connecting to Infinity or Evolution system controls.

Wiring Diagram

Unit Auto-Balancing

Preparation and Procedure

Steps for accurate measurements and the auto-balancing process.

Integrated Control

Mode Selection

Using the unit's control panel and selecting operating modes.

Using This Unit

Your Ventilation System Overview

Understanding the function and benefits of the balanced ventilation system.

Service Parts

Service Parts Identification

List and part numbers for replacement components.

Installers Troubleshooting

Error Codes and Solutions

Diagnostic procedures and solutions for common installation errors.

Installers Troubleshooting (Contd)

More Error Codes and Solutions

Continued diagnostic procedures and solutions for installation errors.

Installers Troubleshooting (Contd)

Additional Troubleshooting Scenarios

Further troubleshooting for airflow and protection mode issues.

Maintenance

Quarterly Maintenance

Regular cleaning and inspection tasks for the unit.

Annual Maintenance (Fall)

Users Troubleshooting

Common User Problems and Solutions

Troubleshooting tips for common issues encountered by users.