28 Specifications subject to change without notice. OM-KSACN0901-02
Set the DAY OFF (for WEEK 2)
1. Select WEEK 2 then press CONFIRM. See “Weekly Timer Operation” on page 27.
Fig. 64 — Confirm
2. Press the UP or DOWN arrow to select the day of the week.
Fig. 65 — Up or Down Arrows
3. Press DAY OFF to select day(s) off.
Fig. 66 — Select DAY OFF
A DAY OFF can be set for other days by repeating steps 2 through 3.
4. Press BACK to revert to the weekly timer.
NOTE: To cancel, follow the same procedures used for setup. The DAY OFF setting is canceled
at the end of the set day.
The mark is hidden
ex. The DAY OFF is set for Wednesday
To Next Page
Loading...
