OM-KSACN0901-02 Specifications subject to change without notice. 33
QUERIES AND SETTINGS
CAUTION: All changes should be performed ONLY by authorized professionals.
Indoor Unit Tx Temperature Query Function
1. When the air conditioning unit is OFF, press COPY for 3 seconds to enter query mode on the wired
controller.
Fig. 75 — Copy
2. Press the UP or DOWN arrows to select.
Fig. 76 — Up or Down Arrows
3. When the air conditioning unit is OFF and in query mode, press the UP or DOWN arrows to
select SP (For Ducted Models Only).
Fig. 77 — Up or Down Arrows
4. Press CONFIRM to adjust the static pressure value.
5. Press the
UP or DOWN
arrow to select the static pressure value (0~4).
6. Press CONFIRM to select the value.
To Next Page
Loading...
