High Wall Type
Owner’s Manual
–19–
Preset Operation
Set preferred operation mode for future use.
The setting is memorized by the unit for future
operation (except airflow direction).
Select preferred operation.
1 Press the PRESET button for 3 seconds to
memorize the setting.
The mark is displayed.
When this button is pressed next time, the
memorized operation mode will be enabled.
Comfort sleep operation
COMFORT SLEEP mode is a OFF timer operation
with automatic temperature and fan speed
adjustment.
1 Press the COMFORT SLEEP button.
Select 1, 3, 5 or 9 hours for the OFF timer operation.
CAUTION
The COMFORT SLEEP mode is not enabled in
the DRY or FAN ONLY operation.
NOTE
• For the cooling operation, the set temperature
will automatically increase 1 degree/hour for
2 hours (maximum 2 degrees increase).
For the heating operation, the set temperature
will decrease.
• During group control operation, the set
temperature and the fan speed are not
automatically adjusted. Only off timer function is
activated.
Sleep timer operation
To start the sleep timer (OFF timer) operation
1 Press the SLEEP button.
Select 1, 3, 5 or 9 hours for the OFF timer operation.
TEMP
1
TEMP
1
CLR
SLEEP
SET
TEMP
1
19-EN
+001111053801_00Ta.book Page 19 Friday, January 21, 2011 3:52 PM
To Next Page
Loading...
