5 62-12119
c. Check for excessive corrosion on the stator. If cleaning is
needed, refer to step 2a.
4. Evaporator Fan Blade. Refer to Figure 2.
a. Check for cracking or wear. Replace the fan blade as necessary.
Figure 2 Evaporator Motor and Fan Blade
5. Wire Harnesses.
a. Examine for any worn or damaged wires and repair as
required.
b. Ensure wire harnesses are properly secured.
6. Defrost Termination Sensor (DTS). Refer to Figure 3.
a. Ensure the DTS is properly secured to the unit and free of
damage. Replace or repair if necessary.
Figure 3 Defrost Termination Sensor (DTS)
To Next Page
Loading...
