Need help?Do you have a question about the Carrier OPN-RTUM2 and is the answer not in the manual?
General| Communication Protocol | BACnet MS/TP |
|---|---|
| Temperature Accuracy | ±0.9°F (±0.5°C) |
| Enclosure Rating | IP20 |
| Supply Voltage | 24 VAC |
| Temperature Measurement Range | 32°F to 122°F (0°C to 50°C) |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Weight | 0.22 lbs (100 g) |
Essential safety guidelines and precautions for handling the RTU Open controller to prevent damage and ensure user safety.
Detailed table listing all wired inputs and outputs for the RTU Open controller, including functions and terminal numbers.
Step-by-step guide for configuring the RTU Open controller for BACnet MS/TP communication.
Common issues and solutions for BACnet MS/TP communication problems with the RTU Open controller.
Instructions for setting up the RTU Open controller to communicate using the Modbus protocol.
Guidance for resolving common Modbus communication issues encountered with the RTU Open controller.
Steps to configure the RTU Open controller for communication using the Johnson N2 protocol.
Common troubleshooting steps for N2 communication problems with the RTU Open controller.
Procedure for setting up the RTU Open controller with the LonWorks Option Card.
Process of commissioning the RTU Open controller for LonWorks communication using its unique Neuron ID.
Configuring a binary input (Input 5) for fire shutdown to immediately stop equipment operation.
Explanation of various alarms like Safety Chain, Fire/Smoke Shutdown, Compressor Status, and Space Temperature.
To Next Page