Burning with hot and cold :
When this refrigeration unit is running or even after, different components can
be very cold or hot (exhaust pipe, tubes, coils, receiver, accumulator or engine
Beware when operating closed from cold or hot components.
Always use adequate safety gloves when doing any
Beware when handling or operating closed from parts that could be sharp (coils,
evaporators, clamps for example).
charging the battery normally vents small amounts of flammable and explosive
Projections of acids on the skin or eyes can cause severe burns.
Keep any flame, any lighted object or any source of sparks away from the battery
Always use Personal Protective Equipm
safety clothes, safety gloves and safety glasses.
Think about protection of environment during all the life of this refrigeration unit.
recuperate and recycle according to current regulations.
When disposing this refrigerant unit do it in an environmentally sound way and in
accordance with current regulations.
Under no circumstances should anyone attempt to repair the Logic or Display Boards. Should a problem
develop with these component, contact your nearest Carrier Transicold dealer for replacement.
Under no circumstances should a technician electrically probe the processor at any point, other than the
at extremely low current levels. Improper use of
rs, jumper wires, continuity testers, etc.
could permanently damage the processor.
the human body can have enough static electricity to
touch. This is especially true of the integrated circuits found on the truck/trailer microprocessor.
To Next Page
Loading...
