Need help?Do you have a question about the Carrier SUPRA HE Series and is the answer not in the manual?
General| Refrigerant | R410A |
|---|---|
| Operating Voltage | 220-240V |
| Type | Split System |
| Series | SUPRA HE |
| Operating Frequency | 50 Hz |
Identifies unit model, serial number, and other key information via a nameplate.
Indicates the noise level in LWA (sound power level) for different unit models.
Provides safety and service instructions to prevent accidents and highlights important stickers.
Details general risks associated with operation, including burns, cuts, noise, gas, and electrical hazards.
Instructions for keeping warning pictograms clean, intact, and correctly placed on the unit.
Specific instructions on how to wash the unit, avoiding high pressure on certain areas and electric components.
Advice on parking the vehicle on slopes to ensure proper water drainage.
Describes the functions and layout of the cab command interface with numbered elements.
Explains how to lock or unlock the cab command to restrict user operations.
Details the process for initiating a PRETRIP test sequence to check unit operation.
Step-by-step guide to starting the unit for road operation, including engaging the RUN/STOP switch.
Provides essential guidelines for safe and reliable operation in Standby mode.
A chart detailing operating voltage, maximum current, and standardized extension cable specifications for Standby mode.
Outlines the procedure for starting the unit in Standby mode, including self-test and activation.
Explains how to activate and operate the unit in City Speed Mode for low speed and low noise.
Describes how to enable automatic start/restart and continuous operation modes.
Instructions for properly shutting down the unit using the cab command.
Guide on how to increase or decrease the temperature set point and confirm the change.
Instructions for initiating a manual defrost cycle, including temperature prerequisites.
Explains how to access and view unit operating data, such as hour meters and sensor readings.
Provides a list of available sensors and meters within the Unit Data menu for reference.
Allows users to set various functions like PRETRIP and temperature units.
A comprehensive list of functions and parameters, their descriptions, and default settings.
Introduces the alarm section and provides initial troubleshooting steps for common unit issues.
Instructions on how to silence or stop the audible alarm buzzer using the cab command.
Describes how to view active and past alarms on the unit's display.
Guides the user on how to clear active alarms from the unit's display.
A detailed list of common alarms, their severity, description, and status abbreviation.
Continues the list of common alarms, covering various system and component malfunctions.
Emphasizes the importance of a comprehensive maintenance program for unit reliability and performance.
Presents a schedule for regular maintenance based on service type and operating hours.
Recommendations on preparing the insulated body and unit before loading cargo.
Guidelines for proper loading procedures to maintain product quality and unit performance.
Provides general recommendations for product transport temperatures and corresponding operating modes.
Excerpt from ATP regulations concerning vehicle approval and refrigeration unit characteristics.
Contact information and procedures for obtaining 24-hour technical assistance and service.
To Next Page